SKF Cooper split roller bearings and bearing units

Designations Designation system for housings Prefix 100 100 series split cylindrical roller bearing (hanger housings, and matched cartridge and housing units only) 01 01 or 01E series split cylindrical roller bearing (hanger housings, and matched cartridge and housing units only) 02 02 or 02E series split cylindrical roller bearing (hanger housings, and matched cartridge and housing units only) Housing type CRES Shoe type rod end housing including matched cartridge CRET “T” type rod end housing including matched cartridge DF Flanged housing with a square flange F Flanged housing with a round flange H Hanger housing P Plummer (pillow) block housing PN SD interchangeable plummer block housing SAFC SAF interchangeable plummer block housing SAFQ SAF interchangeable angled plummer block housing SDC SD interchangeable plummer block housing SDQ SD interchangeable angled plummer block housing SNC SN interchangeable plummer block housing SNQ SN interchangeable angled plummer block housing TP Push type take-up housing TT Tension type take-up housing Material – Grey iron A Aluminium N Ductile iron S Cast steel or fabricated mild steel SS Stainless steel Size identification For plummer block, flanged, and take-up housing, specify the size from 01 to 95. For SN, SD, and SAF interchangeable housings, specify the number reference of the housing it interchanges with, e.g. 3134 for an SD3134 housing, or 515 for an SN515 housing. For hanger and rod end housings with metric sizes, specify the bore diameter followed by “M”: 35M 35 mm to 160M 160 mm For hanger and rod end housings with inch sizes, specify the bore diameter as the whole number of inches followed by two digits representing the sixteenths of an inch: 103 1 3 / 16 in. to 600 6 in. Suffixes AP Grease/air purge points for seals (hanger housings only) BEM Base ends machined, followed by machined length, e.g. BEM 500 mm DOUBLE BOSS Double boss (hanger housings only) S1 Reduced swivel clearance between housing and cartridge SLUB Lubrication hole to spherical seat TRIPLE BOSS Triple boss (hanger housings only) F N 06 S1 100 H 415 DOUBLE BOSS 189 9

RkJQdWJsaXNoZXIy Mzc5OTU=