SKF Cooper split roller bearings and bearing units

Split tapered roller bearings are designed to accommodate combined loads, i.e. simul­ taneously acting radial and axial loads in both directions, and they are intended for the locating bearing position of shafts. Designs and variants Split tapered roller bearings are available as locating (fixed type) bearings only ( fig. 1 ) and: • have a split outer ring • have a split inner ring with integral flanges clamped to the shaft with clamping rings • have a double roller and cage assembly • can withstand both radial and axial loads in both directions • provide axial location Standard assortment • 75 to 180 mm • fitted with brass cages • listed in the product table on page 104 Fig. 1 Split tapered roller bearing Cartridges • are machined for grease groove seals as standard – Other seal options are available on request. – Flanged units may also be supplied with a bulkhead sealing arrangement, page 18 . • are supplied with a drilled hole for attach- ing a temperature sensor – The proximity of the temperature ele- ment hole to the shaft means that if the sensor is a headed type, it will generally require an angled probe. – Alternative positions for the tempera- ture sensor are possible. Housings Split tapered roller bearings are suitable for various housing types, the most common being: • plummer block housings ( product table , page 108 ) • flanged housings ( product table , page 150 ) Housings for split tapered roller bearings are made of ductile iron as standard. 3 Split tapered roller bearings 102

RkJQdWJsaXNoZXIy Mzc5OTU=